Top 7 Ninja Tank Regulator

0
730 reviews analysed
Rank
Product Name
Score

1. Ninja Paintball Reg Regulator – 4500 psi

Ninja Paintball Reg Regulator - 4500 psi

Feature

Description

Description NINJA regulators can toggle from STANDARD 800-900 PSI output to a medium 650 PSI or low 450-550 PSI output in a few minutes by removing shims. This eliminates the need to purchase 2 regulators or separate spring kits. Features MADE IN THE USA! All black tactical look Ninja Aluminum valve cap included SRT piston ?Sonic Recharge Technology piston-plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down SPA ? Shim Pressure Adjustment- change output pressure by adding or removing shims, not springs or pistons MFV ? Mini Fill Valve ? Non wrist digging, low profile design fill valve Meets all DOT, CGA and ASTM specifications Completely rebuildable by the user Every regulator is hand crafted and factory tested Super low response curve 0-50 psi from full to empty Safety ASTM COMPLIANT bonnet thread ASTM COMPLIANT DOT burst disc ASTM COMPLIANT Low pressure burst disk ASTM COMPLIANT Restrictor, bleed hole and safety groove Mini Fill Valve is hardened, plated 5000 psi rated Regulator installed to ASTM specifications

2. Ninja Paintball Pro V2 Regulators

Ninja Paintball Pro V2 Regulators

Feature

Description

Output Pressures:
Standard: Adjustable (450 to 800 psi)
SHP: Adjustable (1100 to 950 psi)
SLP: 300 psi

3. Ninja Paintball Tank Regulator – 3000psi

Ninja Paintball Tank Regulator - 3000psi

Feature

Description

High quality replacement regulator from Ninja Paintball offers a fast
refill rate with adjustable output pressure. They are set at 800psi from
the factory. Standard regs include a steel bonnet and standard size gauge.
Regulator replacement should only be done by a qualified Airsmith. Please
contact your local paintball shop or Ninjapaintball.com for installation.
Features: For 3K (3000 psi) Bottles only Adjustable Ouput Pressure Steel
Bonnet Standard Gauge

4. Ninja Paintball Pro V2 Regulator SLP – 4500 psi

Ninja Paintball Pro V2 Regulator SLP - 4500 psi

Feature

Description

Output Pressures:
Standard: Adjustable (450 to 800 psi)
SHP: Adjustable (1100 to 950 psi)
SLP: 300 psi

5. Ninja 4500 PSI STD HPA Regulator for High Pressure Air Nitrogen Paintball Tanks

Ninja 4500 PSI STD HPA Regulator for High Pressure Air Nitrogen Paintball Tanks

Feature

Description

NINJA regulators can toggle from STANDARD 800-900 PSI output to a medium 650 PSI or low 450-550 PSI output in a few minutes by removing shims. This eliminates the need to purchase 2 regulators or separate spring kits.

6. Ninja Paintball Reg Extender – Black

Ninja Paintball Reg Extender - Black

Feature

Description

The new Ninja regulator extender has the same Made in USA quality and support you are used to with Ninja Paintball and allows you to extend your regulator by about a half inch to the overall length. This allows you to have a more comfortable fit with your tank when you shoulder your gun as well as giving you some extra room for your wrist near the trigger frame.

If you have a tank that is a little too short and needs it a bit longer than the Ninja regulator extender is the answer. The Ninja reg extender has industry standard 825-14 NGO threading and is ASTM compliant so it will work with all ASTM compliant bonnets and ASA’s on the market.

7. Ninja Paintball Pro V2 Compressed HPA Air Tank Standard Adjustable Regulator Sizes

Ninja Paintball Pro V2 Compressed HPA Air Tank Standard Adjustable Regulator Sizes

Feature

Description

Ninja Pro V2 Air Tank Standard Adjustable Regulator

Conclusion

By our suggestions above, we hope that you can found Ninja Tank Regulator for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general