The Best Hurricane Diamond Blade 14

0
718 reviews analysed

1. DEWALT DW4725 High Performance 4-1/2-Inch Dry Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor for Masonry

DEWALT DW4725 High Performance 4-1/2-Inch Dry Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor for Masonry

Feature

Description

Color:Original Version

Product Description

The product is 4-1/2″ HiPerf MAS Blade. Easy to use. The product is manufactured in China.

Amazon.com

DeWalt’s 4-1/2-Inch High Performance Masonry Diamond Blade provides long life and enhanced material removal. It has a thinner kerf to increase speed of cut while minimizing dust, and achieves 30 times longer life than bonded abrasives. This blade is best for cutting block, masonry siding products, and other masonry materials. It offers a faster cut rate at a constant depth, which is ideal for thinner and softer masonry materials.

See all Product description

2. ROK 3Pk 4 1/2" Diamond Blade Set – Fits 7/8" or 5/8" Arbor Angle Grinders

ROK 3Pk 4 1/2" Diamond Blade Set - Fits 7/8" or 5/8" Arbor Angle Grinders

Feature

Description

3pc kit ideal for cutting tiles made of Granite, Marble, Ceramics, concrete & other similar material. Fits all Angle grinders with a 7/8″ or 5/8″ arbor. 15,000 RPM Max,

Blades are made of high quality diamond steel and they can be used wet or dry.

3. Husqvarna Construction Products 542774463 14 Inch by .118 by 1 Drive Pinhole 20mm B VH5 High Speed Diamond Blade

Husqvarna Construction Products 542774463 14 Inch by .118 by 1 Drive Pinhole 20mm B VH5 High Speed Diamond Blade

Feature

Description

Product Description

14″, vh-5 Husqvarna segmented high speed diamond blade, 1″ to 20mm arbor for cutting masonry, concrete, stone, tools hand held cut off saws, brick saws, Walk behind saws up to 20HP.

From the Manufacturer

Let the power of diamonds do the work for you with the Husqvarna VH5 high speed diamond blade. The VH5 is a general purpose blade for cutting cured concrete, and brick. This blade is made for dry or wet cutting, is diffusion bonded and is a quality grade level product.

4. GoYonder 4.5 Inch Super Thin Diamond Saw Blade for Cutting Porcelain Tiles,Granite Marble Ceramics (4.5")

GoYonder 4.5 Inch Super Thin Diamond Saw Blade for Cutting Porcelain Tiles,Granite Marble Ceramics (4.5")

Feature

Description

Size:4.5″

Outer Diameter(mm):115mm /4.5 inch
Segment Height:10mm
Core Thickness(mm):1.2mm
Rpm:8000-11000
Quality:A class
Arbor:7/8″-5/8″ (22.23mm-20mm)
Cutting:dry and wet cutting
Application:Porcelain tile, Granite ,Marble,stone ,ceramic

Our main products are diamond segments, saw blades, wire saws,diamond abrasive, flexible diamond polishing pad, floor polishing pads, cup wheels, profiling wheels, CNC-profiling wheels, drill bits, finger router bits, brushes, abrasive blocks and electroplated tools, with various specifications.
All these products have reached internationally advanced standard and are widely used for cutting, grinding or polishing granite, marble, concrete, asphalt, refractory, porcelain and glass.
All of our products are under strict quality control.

5. Mad Dog HS 14-Inch (14") X .125 X 1"-20MM Wet/Dry Diamond Blade for Concrete, Masonry, Stone, Roof Tile and Similar Materials

Mad Dog HS 14-Inch (14") X .125 X 1"-20MM Wet/Dry Diamond Blade for Concrete, Masonry, Stone, Roof Tile and Similar Materials

Feature

Description

Size:14-Inch

Mad Dog HS 14-Inch (14″) X .125 X 1″-20MM Wet/Dry Diamond Blade for Concrete, Masonry, Stone, Roof Tile and Similar Materials. Made with top-quality GE Superabrasive diamond, this blade is Guaranteed to deliver a Better Combination of cutting speed, life and a low cost per cut than any other blade on the market! Dimensions are 14″ diameter X .125 thick with a standard 1″ arbor hole for most masonry saws and hand-held machines. Also included is a 20mm bushing for Stihl power saws and a drive pin hole for adapting to 8-24hp walk-behind saws. The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting. The maximum safe operating speed is 5,460 RPM.

6. Makita 2 Pack – 4.5” Turbo Diamond Blades For 4.5” Grinders – Ultra-Fast Cutting For Concrete, Masonry & Brick – 4-1/2" x 7/8”

Makita 2 Pack - 4.5” Turbo Diamond Blades For 4.5” Grinders - Ultra-Fast Cutting For Concrete, Masonry & Brick - 4-1/2" x 7/8”

Feature

Description

Size:2 Pack | 4.5″ Inch Blades | For 4.5″ Grinders

Optimize your concrete, block, and brick cutting work with this Makita 2 Pack Premium 4-1/2” Diamond Turbo Blades. Working at a 90-degree angle, perpendicular to the work surface, applying the proper amount of pressure to allow the cutting blade to do the work. For best results, consider not pushing too hard on the blade, which can cause the grinder to stall or kick back or give a less efficient cutting action, while also increasing the chances of slippage or loss of control of the tool, resulting in injury or damage and premature wear. Applying light to moderate pressure and consistent movement will provide the most efficient cut and minimize heat build-up causing warpage of the blade. Consider using light pressure and a consistent motion throughout the cut for the fastest cut-rate and prolonged wheel life. Excessive pressure through the cut causes increased friction and heat build-up, which can cause blade warpage and reduced wheel life. For demanding applications, higher amperage &/or torque angle grinders provide easier, long-lasting & efficient cuts.

7. Makita 2 Pack – 4.5” Segmented Diamond Blades For 4.5” Grinders – Long-Lasting Cutting For Concrete, Masonry & Brick – 4-1/2" x 7/8”

Makita 2 Pack - 4.5” Segmented Diamond Blades For 4.5” Grinders - Long-Lasting Cutting For Concrete, Masonry & Brick - 4-1/2" x 7/8”

Feature

Description

Optimize your concrete, block, and brick cutting work with this Makita 2 Pack Premium 4-1/2” Diamond Segmented Blades. Working at a 90-degree angle, perpendicular to the work surface, applying the proper amount of pressure to allow the cutting blade to do the work. For best results, consider not pushing too hard on the blade, which can cause the grinder to stall or kick back or give a less efficient cutting action, while also increasing the chances of slippage or loss of control of the tool, resulting in injury or damage and premature wear. Applying light to moderate pressure and consistent movement will provide the most efficient cut and minimize heat build-up causing warpage of the blade. Consider using light pressure and a consistent motion throughout the cut for the fastest cut-rate and prolonged wheel life. Excessive pressure through the cut causes increased friction and heat build-up, which can cause blade warpage and reduced wheel life. For demanding applications, higher amperage &/or torque angle grinders provide easier, long-lasting & efficient cuts.

8. Cougar Heavy-Duty 14-inch (14") Dry/Wet Concrete Diamond Blade, Supreme Quality with Laser-Welded 12MM Tall Segments

Cougar Heavy-Duty 14-inch (14") Dry/Wet Concrete Diamond Blade, Supreme Quality with Laser-Welded 12MM Tall Segments

Feature

9. 5QTY 14" DIAMOND SAW BLADE CONCRETE BRICK BLOCK STONE ROCK MASONRY 10MM Segments

5QTY 14" DIAMOND SAW BLADE CONCRETE BRICK BLOCK STONE ROCK MASONRY 10MM Segments

Feature

Description

General Purpose Premium Segmented 14 inch Diamond Blade with 10 mm segment height. This general purpose segmented blade is for fast cutting at a low initial cost on a wide variety of materials. A heat treated steel core provides extreme blade strength for a deep cut. The 14″ blades have been treated with laser welds on both sides of the segments to add strength for better cutting speed and longer blade life. IDEAL FOR CUTTING Concrete, Brick, light weight Block, Pavers, Field Stone, and masonry materials either wet of dry. Can be used on High Speed Angle Grinders, Circular Saws, Masonry Saws and Gas Cut-Off Saws. For light or medium duty cutters.

Secifications:
Segment height: .395″(10mm)
Arbor: 1″
Size: 14″x.125″x.395″/10mm.
Includes: 20mm heavy duty bushing.
Use: Dry or Wet

10. 14" Sintered 10mm Wet/Dry General Purpose Concrete Diamond Saw Blade (10 Pack)

14" Sintered 10mm Wet/Dry General Purpose Concrete Diamond Saw Blade (10 Pack)

Feature

Description

General Purpose Premium Segmented 14 inch Diamond Blade with 10 mm segment height. This general purpose segmented blade is for fast cutting at a low initial cost on a wide variety of materials. A heat treated steel core provides extreme blade strength for a deep cut. The 14″ blades have been treated with laser welds on both sides of the segments to add strength for better cutting speed and longer blade life. IDEAL FOR CUTTING Concrete, Brick, light weight Block, Pavers, Field Stone, and masonry materials either wet of dry. Can be used on High Speed Angle Grinders, Circular Saws, Masonry Saws and Gas Cut-Off Saws. For light or medium duty cutters.

Secifications:
Segment height: .395″(10mm)
Arbor: 1″
Size: 14″x.125″x.395″/10mm. 
Includes: 20mm heavy duty bushing.
Use: Dry or Wet

Conclusion

By our suggestions above, we hope that you can found Hurricane Diamond Blade 14 for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general