Top 9 Gasket Replacement For Nutri Ninja

0
882 reviews analysed

1. 3x Rubber Gasket Replacement Parts for 2.5" 6 pin Rubber Blade Nutri Ninja BL770 30 BL771 30 BL773 30 BL780 30 Blender (NOT For any other Ninja series)

3x Rubber Gasket Replacement Parts for 2.5" 6 pin Rubber Blade Nutri Ninja BL770 30 BL771 30 BL773 30 BL780 30 Blender (NOT For any other Ninja series)

Feature

Description

This listing is only for 6-fin Ninja BL770 BL771 BL773 BL780 Blender

2. Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640

Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640

Feature

Description

One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.

KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it

2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

3. Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz.32 oz

Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz.32 oz

Feature

Description

NUTRI NINJA 6 FIN BLADES WORKS FOR THIS BLENDERS ONLY Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70

DOES NOT WORK FOR THIS MODELS Nutri Ninja Pro Blender 900w BL450-30, BL451-30, BL454-30, BL455-30 and 1000w Auto-iQ BL480-30 BL481-30 BL482-30 BL484-30

4. Sduck 3x Rubber Gasket Replacement Parts for 2.5" 6 pin Rubber Blade Nutri Ninja BL770 30 BL771 30 BL773 30 BL780 30 Blender (NOT For any other Ninja series)

Sduck 3x Rubber Gasket Replacement Parts for 2.5" 6 pin Rubber Blade Nutri Ninja BL770 30 BL771 30 BL773 30 BL780 30 Blender (NOT For any other Ninja series)

Feature

Description

This listing is only for 6-fin Ninja BL770 BL771 BL773 BL780 Blender

5. Blender Blade Gasket Replacement for Nutri Ninja, O-ring Gasket Blender Replacement Parts Compatible with Ninja BL660 BL770 BL740 BL771 BL773CO BL201 (4 pack)

Blender Blade Gasket Replacement for Nutri Ninja, O-ring Gasket Blender Replacement Parts Compatible with Ninja BL660 BL770 BL740 BL771 BL773CO BL201 (4 pack)

Feature

Description

Blender Blade Gasket Replacement

6. SunnyMemory 5PCS Replacement Gaskets for Ninja 7 fin replacement blade with 1 X Gasket Pick for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013

SunnyMemory 5PCS Replacement Gaskets for Ninja 7 fin replacement blade with 1 X Gasket Pick for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013

Feature

Description

5PCS Replacement Gaskets for Ninja 7 fin replacement blade with 1 X Gasket Pick for Nutri Ninja Auto iQ AMZ012BL, BL2012, BL2013, BL450, BL454Q, BL456, BL480, BL480D, BL481, BL482, BL486CO, BL487, BL487A, BL487Q, BL488W, BL490, BL491, BL492, BL492W, BL494, BL494C, BL640, BL641, BL642, BL642W, BL642W1, BL642Z, BL680, BL680A, BL682, BL682W, BL687CO, BL910, CT640C, CT641, CT641, CT680A, CT680CO2SS, CT680SS, CT680SSCCO, CT680W, CT682SP, NN100, NN100A, NN101, NN102, NN210, NN210C.

7. Replacement Parts for Nutri Ninja,7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL682-30 BL642-30 BL450-30 BL482-30 BL687CO BL2013 and More(7 Fins)

Replacement Parts for Nutri Ninja,7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL682-30 BL642-30 BL450-30 BL482-30 BL687CO BL2013 and More(7 Fins)

Feature

Description

7fins replacement blade assembly (7-fin as pictured) is suitable for Nutri Ninja Blender. It is suitable for NUTRI NINJA BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.

Pakcage: 1 pack

Fit Cups for:18oz 24oz 32oz

ONLY Fit for:BL450-30, BL480-30, BL481-30, BL482-30, BL485, BL486CO, BL487, BL487A, BL487-30, BL490, BL491, BL492, BL492W, BL640, BL641, BL641-30, BL642, BL642W, BL680A, BL680A-30, BL681A, BL682, BL682-30, NN100,NN102,etc.

:Noted:Please confirm the shape before you buy the product in case of not fit the cup.

Any questions,please feel free to contact us.Your emails will be highly treated.

8. Zerodis 4PCS 10cm/3.94inch White Rubber Sealing O-Ring Gasket Replacement Parts for Ninja Juicer Blender Replacement Seals

Zerodis 4PCS 10cm/3.94inch White Rubber Sealing O-Ring Gasket Replacement Parts for Ninja Juicer Blender Replacement Seals

Feature

Description

Specification:
Condition: 100% Brand New
Material: Rubber
Color: White
Fit for: Ninja Bullet Juicer
Diameter: Approx. 10 cm / 3.94 inch
Weight: Approx. 40g

Package Included:
1 x Pack of 4Pcs Sealing O-ring(Not Included Mixed Blade)

Note:
This gasket is replacement part, not the original.
Please allow slight deviation for the color and measurement. Thanks for your understanding.

9. Blender Bottom Blade Assembly 7 Fins and 1 Gasket Rubber Replacement Parts Compatible with Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Extractor Blade Replace 409KKU641

Blender Bottom Blade Assembly 7 Fins and 1 Gasket Rubber Replacement Parts Compatible with Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Extractor Blade Replace 409KKU641

Feature

Description

Specification:
Brand: BTNTVEN
Condition: 100% Brand New and never used
Package Includes:
1 x 7 Fins Blender Blade Assembly, 1 x Extra Gasket Rubber.

Fits The Following Nutri Ninja Blender Models :
For Nutri Ninja BlendMax DUO with Auto-iQ Boost (BL2012, BL2013)
For Nutri Ninja Auto-iQ (BL480, BL480D, BL481, BL482)
For Nutri Ninja Auto-iQ Complete Extraction System (BL486CO)
For Nutri Ninja Auto-iQ Pro Complete (BL487, BL487A, BL488W)
For Nutri Ninja Auto-iQ Blender (BL490)
For Nutri Ninja Auto-iQ System (BL491, BL492)
For Nutri Ninja Auto-iQ Compact System (BL492W)
For Nutri Ninja Ninja Blender DUO with Auto-iQ (BL640, BL641, BL642, BL642W, BL642Z)
For Nutri Ninja Blender System with Auto-iQ (BL680, BL680A, BL682)
For Ninja Intelli-Sense Blender Duo (CT640C, CT641)
For Ninja Intelli-Sense Kitchen System (CT680, CT680A, CT680SS, CT680W)
For Ninja Intelli-Sense Kitchen System with Auto-Spiralizer (CT682SP)
For Nutri Ninja Nutri Bowl DUO with Auto-iQ Boost (NN100, NN100A, NN101, NN102)

If you have any problem about your order, please feel free to contact us.

Conclusion

By our suggestions above, we hope that you can found Gasket Replacement For Nutri Ninja for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general