Top 10 3 Hp 79Cc Predator Engine
Finding your suitable readers for 3 hp (79cc) predator engine is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 3 hp (79cc) predator engine including detail information and customer reviews. Let’s find out which is your favorite one.
842 reviews analysed
1. Briggs and Stratton 13R232-0001-F1 Engine
- Dura-bore cast iron cylinder sleeve for extended life
- Maintenance-free Magnetron electronic ignition for quick, dependable starts
- Overhead valve design (OHV) for cooler operation and longer valve life
- Dual ball bearing
- Dual-clean air cleaner pleated paper filter with a foam pre-cleaner ensures maximum protection for extended engine life
This genuine 208cc Briggs & Stratton single cylinder engine offers dependable power for your equipment needs. With a power rating of 9.50 gross torque, this engine features a premium dual clean air filtration system and maintenance-free Magnetron electronic ignition. With a manufacturer limited warranty of 2 years consumer use / 90 days commercial use, Briggs & Stratton provides power that you can trust. This engine includes a Dura-Bore cast iron cylinder sleeve for extended life. This engine includes an installed muffler. This engine includes a fuel tank.
2. GO KART TORQUE CONVERTER for PREDATOR ENGINE, 6.5 HP 212CC 3/4" OHV HORIZONTAL SHAFT, ENGINE CLUTCH.75 inch, Replaces Comet TAV2 218353A, 12t 35 and 10T 40 or 41 ✮ By BULLET LINES
- unique engine bolt kit for predator engines and the correct anti vibration pilot washer.
- 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.
- small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter
- A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration
- Engagement range is approximately 2350 RPM
This auction is for 1 brand new complete 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine Torque Converter with all hardware necessary to mount.
Important Note: Included is the unique engine bolt kit for predator engines and the correct anti vibration pilot washer. Predator engines have a shoulder at the crank that is off by which cause the driver to rub on the back plate and misalignment of the belt; We provide extra piece of hardware to fix the problem. (no other kit on the market provides everything needed to fit a 212cc predator engine).
This kit comes with either a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.
Bullet Lines torque converter is an asymmetrical inline small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter. This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments.
Our torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.
Engine compatability: Predator 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine.
3. Motovecor Centrifugal Clutch Go Kart Clutch Predator Engine Clutch Baja Mini Bike 3/4" Inch Bore 12 Tooth 12T for #35 Chain 6.5HP – Upgrade
- Centrifugal Clutch 3/4” Bore 12 Tooth for 35 Chain, Common clutch for 2-6.5 HP engines 2300 PRM
- Fits for Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4” shaft
- Also fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-6.5HP motors in all brands
- Perfect for Go Kart, Minibike and Fun Kart
- Go Kart Clutch kit includes two set screws, but chain is not included
Two set screws are included, but chain is Not included.
Centrifugal Clutch 3/4" bore 12 Teeth use # 35 Chain
This Clutch Will Fit 2 – 6.5 HP Engines for Honda GC160, GC190, GX120, GX140, GX160, GX200
Also will fit Briggs & Stratton and 2 – 6.5 HP With 3/4" Shaft
Also Will Fit Tecumseh Engines 2 – 6.5 HP With 3/4" Shaft
And Any Other Engines With 3/4 Crank Shaft and 3/16" Key Way.
Before ordering please check your crankshaft size.
1 x Go Kart Clutch
Any problem, please send us message, we will give you a satisfied solution ASAP!
4. DuroMax, XP7HP, blue
- PLENTY OF POWER: With a powerful 4 stroke, 7 HP engine, the XP7HP is strong enough to power your workload.
- QUICK START SYSTEM: With an easy recoil start engine, rain or shine your easily able to get your engine going.
- POWERING EVERYONE EVERYWHERE: The XP7HP is EPA approved and can be used in all 50 states.
- power source type: Gasoline
On the first day of Christmas, spend more time with family and less time outside kicking your snowblower with the DuroMax 7 HP 3/4-Inch Start Gas Engine. The horizontal 3/4-inch shaft makes this engine a year-round companion to your go-kart, leafblower, and lawnmower, too. This little beauty isn’t just welcome during the holidays, though. The generous 1-gallon capacity gas tank runs at 1/4 gallon-per-hour, so it holds more fuel than it burns. Aside from blowing your leaves away, you’ll be blown away by this 7 horsepower engine, which will race your go-kart up to 35 miles-per-hour. If you’re looking for the Little Engine that could: look no further. Both weather and waterproof, you don’t need to shy away from nature. If you’re tired of distrusting engines, say “Yes, I can,” to a tough and agreeable one.
5. Briggs and Stratton 83132-1035-F1 550 Series 127cc Engine
Briggs and Stratton 550 Series engine runs cooler and cleaner, delivering more power, smoother operation, longer engine life and improved fuel economy. Excellent performer for mid-duty applications. Dura-Bore(r) cast iron cylinder sleeve for extended life, float carburetor for consistent, easy starting, maintenance-free Magnetron(r) electronic ignition for quick, dependable starts, Maxi-Clean(tm) automotive-type pleated paper air filter provides superior protection for long engine life, dual oil filter and drain, dual ball bearings that reduces wear for longer life, 50-state compliant engine, buyer protection package provides two-year consumer warranty.
6. DEDC Centrifugal Clutch 3/4 Bore 12T, Go Kart Clutch Bike Clutch for Predator 212 CC Mini Bike Fun Kart Honda GX160 GX200, Up to 8 HP Chain Model 35
- ????12 Tooth, Horse power up to 8 HP, Chain model 35, Inner bore 3/4 inch, Keyway 3/16inch, engagement speed 2000±100 RPM.
- ????Clutch height 54.5mm, outer diameter 107mm. WORKS with 15 inch tires.
- ????PERFECT for: Go Kart, Mini bike, Fun Kart. Honda GX160 Honda GX200 Harbor Freight Greyhound 196cc Harbor Freight Predator 212cc
- nearly all 5.5 HP clones
- Nearly all 6.5 HP clones Nearly all 4-7HP motors, all brands.
- ????TWO Set Screws are included (it requires only 2 screws). Any problems if you have after recieving items, please contact us for support and we are here 24 hours for your need !
- ????OEM replacement quality. Lifetime Warranty ! Fast After-sales service !
Here is the DEDC Centrifugal Clutch 3/4 Bore 12T, Go Kart Clutch Bike Clutch for Predator 212 CC Mini Bike Fun Kart Honda GX160 GX200, Up to 8 HP Chain Model 35
Why do you need a centrifugal clutch replacement? 1 Optimize kart or bike starting
2 Make shifting gears easier and smoother, without damaging
3 Prevent damage from over-pressure on powersports transmission part
4 Reduce torsional shock
Horse Power up to 8 HP
Chain Model #35
Inner Bore 3/4”
Engagement Speed 2000±100 RPM
Clutch Height 54.5mm
Outer Diameter 107mm
Works with 15 inch tires.
Go Kart, Mini bike, Fun Kart, Honda GX160 Honda GX200 Harbor Freight Greyhound 196cc Harbor Freight Predator 212cc, Nearly all 5.5 HP clones Nearly all 6.5 HP clones Nearly all 4-7HP motors, all brands.
7. Go Kart Clutch, Trkimal Centrifugal Clutch 12 Tooth for Mini Bike Engine Up to 6.5 HP 3/4" BORE #35 Chain 12T for Predator 212 CC Mini Bike Fun Kart Honda GC160, GC190, GX120, GX140, GX160, GX200
- 12 Teeth, Chain model 35#, shaft inner bore 3/4 inch, Keyway 3/16inch, engagement speed 2000±100 RPM.
- Fit Briggs & Stratton 2 – 6.5 HP with 3/4″ Shaft 212 212cc Predator Engine Clutch, Clutch height 54.5mm, outer diameter 107mm.
- The Clutch fit 2 – 6.5 HP 168 188 Gasoline Engines for Generator Compatible with Honda GC160, GC190, GX120, GX140, GX160, GX200
- Three Screws are included.100% new clutch Super Grade High Impact/Wear Resistant Steel, 50% Longer Lifetime
- Go Kart Clutch kit includes three pcs screws, but chain is not included
Here is the DEDC Centrifugal Clutch 3/4 Bore 12T, Go Kart Clutch Bike Clutch for Predator 212 CC Mini Bike Fun Kart Honda GX160 GX200, Up to 8 HP Chain Model 35 Why do you need a centrifugal clutch replacement? 1 Optimize kart or bike starting 2 Make shifting gears easier and smoother, without damaging 3 Prevent damage from over-pressure on powersports transmission part 4 Reduce torsional shock Technical Parameter: 12 tooth Horse Power up to 8 HP Chain Model #35 Inner Bore 3/4” Keyway 3/16” Engagement Speed 2000±100 RPM Clutch Height 54.5mm Outer Diameter 107mm Works with 15 inch tires. Perfect for: Go Kart, Mini bike, Fun Kart, Honda GX160 Honda GX200 Harbor Freight Greyhound 196cc Harbor Freight Predator 212cc, Nearly all 5.5 HP clones Nearly all 6.5 HP clones Nearly all 4-7HP motors, all brands.
8. HP 15.6" FHD Home and Business Laptop Core i7-1065G7, 16GB RAM, 1TB SSD, Intel Iris Plus Graphics, 4 Core up to 3.90 GHz, USB-C, HDMI 1.4 4K Output, Keypad, Webcam, 1920×1080, Win 10
- Intel Core i7-1065G7 with Intel Iris Plus 4K Graphics (1.3 GHz base clock, Up to 3.9GHz max boost clock, 8 MB Cache, 4 Cores) Smart Quad-core, eight-way processing performance for HD-quality computing
- 15.6″ diagonal Full HD (1920 x 1080) IPS anti-glare micro-edge WLED-backlit. Energy-efficient WLED backlit screen. The 1920 x 1080 resolution boasts impressive color and clarity
- DDR4 RAM Memory with Solid State Drive (SSD) combo brings the muscle for gaming, creating, and advanced multitasking, so you can do it all, anywhere. To smoothly run your games and photo- and video-editing applications, as well as multiple programs and browser tabs all at once
- 1x USB 3.1 Gen 1 Type-C (Data Transfer Only, 5 Gb/s signaling rate), 2x USB 3.1 Gen 1xType-A (Data Transfer Only)),1xAC smart pin, 1 HDMI, 1 Headphone/microphone combo. 14.11″ W x 9.53″ D x 0.71″ H, 3.85 lbs
- 802.11ac/b/g/n Wireless WIFI, Bluetooth 4.2. Full-size island-style keyboard with numeric keypad. HP TrueVision HD Camera with integrated dual array digital microphones
Intel Core i7-1065G7
# of Cores
Max Turbo Frequency
Processor Base Frequency
Intel Iris Plus Graphics
16GB DDR4 2666MHz RAM
Solid-state drive (SSD) 1TB
Full HD IPS anti-glare micro-edge WLED-backlit
1xUSB 3.1 Gen 1 Type-C
2xUSB 3.1 Gen 1 Type-A
1xAC smart pin
1x HDMI Support 4K Video Outputs
1 xHeadphone/microphone combo
Realtek RTL8821CE 802.11b/g/n/ac(1×1)
Windows 10 Home
9. PROFessional Powertrain DCT8 Chevrolet 5.3L V8 Engine, Remanufactured
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel and QC experts make improvements. Why shouldn’t our engine last longer than your first?
- Engines come with installation gasket set and oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
This engine is remanufactured using the most technically advanced methods – incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary “ProTester Max” at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a “hot fire” engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!
10. 3/4" Bore 12 Tooth 12T Clutch & #35 Chain for Predator 212cc 6.5HP Small Engine
It is the customers responsibility to make sure that this is the correct part for their unit.
By our suggestions above, we hope that you can found 3 Hp 79Cc Predator Engine for you.Please don’t forget to share your experience by comment in this post. Thank you!